Touch Free Elevator Button Terminal of Contactless Holographic Imaging technology
Product Introduction
WABON touchless elevator button terminal adopts interactive holographic imaging technology which is one of the most cutting-edge technologies in the world.
Passengers can complete the elevator destination floor registration directly in the air without any touching to eliminate the risk of transmitting bacteria and viruses through physical contact.
Touchless Elevator Terminal are available for elevator LOP and elevator COP. It is different from physical buttons or screens. Touching in the air, offer you a brand new experience.
Product Parameter
Mode |
AIM-05 |
AIM-05 |
AIM-LOP01 |
Size |
Button Dia27mm |
Button Dia27mm |
Button Dia27mm |
View angle |
L/R±30° |
L/R±30° |
L/R±30° |
Bright |
500 |
500 |
500 |
Interface |
RS485 |
RS485 |
RS485 |
Input Voltage |
DC 24V |
DC 24V |
DC 24V |
Current |
0.2A |
0.2A |
0.2A |
Power |
4.8W |
4.8W |
4.8W |
Storage temperature |
-25℃~65℃ |
-25℃~65℃ |
-25℃~65℃ |
Work temperature |
-20℃~60℃ |
-20℃~60℃ |
-20℃~60℃ |
Work humidity |
20%~80% |
20%~80% |
20%~80% |
Overall Size |
182X175X63 (up) X92(down) |
235(L)*184(W)*75.2 |
133X133X42 (up) X64(down) |
Installation |
Plug-in |
Semi-embedded |
Plug-in |
Product feature and application
Product Feature
1) No physical screen is used, and the world's leading interactive holographic imaging technology is adopted.
2) Contactless elevator button terminal interaction is sensitive, simple and easy to operate without any delay
3) Completely cut off contact to avoid mutual infection, avoid being disinfected from virus in public.
4) The safety and stability of the equipment are absolutely guaranteed, and it is seamlessly connected to the original system.
Applications: Elevator LOP, Elevator COP
Production Details
Embedded Box: 1.2mm cold rolled sheet with spray painted black color.
Frame: 1.5mm aluminum alloy with matte silver color
Built in interactive holographic imaging glass
Wall mounted installation and semi-wall mounted installation are available.
Contactless elevator button terminal are available for lift LOP and lift COP.
Product Function
1) UI interactive
Sensitivity: response time is less than 30s
Prevent faulty touch
Configuration of buttons and display floors with two setting menus, as follow
(A) The value of special buttons on the homepage;
(B) The corresponding relationship between the physical value of the elevator control board and the actual call value
Basic Functions
(1) Click the button to change color, accompanied by a single-byte beep, and the backlight flashes
(2) Achieve the purpose of calling the elevator through a combination of 1 or 2 digits
(3) During the interaction process, there should be no undesirable phenomena such as blur, diffusion, overlap, dislocation, and repetition
2) Radar sensing
When within 1m, the brightness of the display is highest.
When the radar senses no one, the brightness of the display is reduced by half.
3) Back light panel
Color: blue
Mode: breathing light
http://www.wabon-hmi.com/